P801
Gang Programmer
Features
- Very fast programming with high performance pre-checks and post programming checks.
- Stand Alone or PC remote operation.
- Easy expansion for package styles up to 56 pin.
- Modules can be changed quickly and easily.
- Modules provide reliable contact, no adaptors required.
- Easy download via RS-232.
- Optional High Speed IEEE1284 parallel port.
|
Description and Technical Specifications
Programming Features
- High Speed programming to manufactures certified specification.
- Pre-Program checks are selectable (empty check, bit check, or none).
- Verify Margins can be modified from approved algorithms to marginal conditions (+/- 10% deviation from normal).
- Security Lock (sector protect) will disable both program and erase operation in any number of available sectors for in-circuit programmable devices.
- Device Check for correct insertion and faults.
- Bus Isolation for data integrity with 208 drivers built in.
- Turbo Charge Modes in addition to the inherent high speed two features are embodied:
• Skip - where the programmer does not attempt to program empty locations.
• Memory Mapping - which allows areas of the programmable device not used to be excluded from the program, erase and verify field, thereby increasing throughput proportionally.
Support
- 4 sockets in gang or set and up to eight sockets in gang mode depending on plug in module.
- EPROMS, EEPROMS, FLASH, Serial EPROMS, and Microcontrollers.
- Package Types DIP and PLCC (no third party adaptors required).
- Low Voltage Technologies - all voltages from 2.0V up to 7.0V enabling support of 2.4V and 3.3V technologies.
- 8, 16 and 32 bit modes.
Operating Benefits
- User set-up restored on power up.
- Low cost of ownership and low cost module configurations.
- Memory device data editing tools include:
• List or Change Data
•
Insert/delete Bytes
•
Fill Ram
• Block Move
• String Search
- Edit functions can be locked out for production use.
High Speed Data Transfer
- Optional Parallel Interface - high speed standard IEEE 1284 parallel port giving enhanced bi-directional communication.
- Download speed is further enhanced by DMA.
- Supplied with StagCom95 and cable.
|
Device Support
EPROMS, EEPROMS, Serial EPROMS, FLASH and Microcontrollers.
Processor
32 bit Embedded RISC Microcontroller with cache memory.
Memory
4 Mbytes (32Mbits) standard. 16 Mbytes (128Mbytes) expansion using 72 pin SIMMs.
Local interface
Display: 20 x 4 character alphanumeric back-lit LCD.
Keypad: Silicon rubber, tactile 23 keys including dedicated program and cursor buttons.
I/O Port
Serial RS232 port with Baud rate selection 1200, thru 115200. Programmable stop bit. Hardware handshaking protocol.
Data transfer to and from all platforms including PC, VAX, SUN, Macintosh.
I/O format selection includes: ASCII, HEX Space, binary, binary rubout, Intel 32 bit, Motorola S-Record, Stag binary, Stag Hex, Extended TEK-Hex.
Dimensions
440 x 260 x 130mm. (17.2 x 10.4 x 5.2").
Weight
500g. (1.1lb).
Environmental
EMC Emissions - Complies with EN 50081-1.
EMC Immunity - Complies with EN 50082-1.
Safety - Complies with EN 60950.
Temperature - Operating: 0-35°C.
 Download Device Support list (PDF)
Download Product Manual (PDF)
If you want to receive more information on our products, you can fill in an information request form that will be sent directly to Stag.
Send an information request |
